When it comes to jewellery laser welding machines, there are several options available on the…
No More Mistakes With MINI FIBER LASER MARKING MACHINE
The operation of the mini fiber laser marking machine is not difficult, but in the process of use and the operation of the machine, we need to pay attention to the daily maintenance of the machine.
So what problems should be paid attention to when marking and filling?
Let zoey exporting laser company explain:
1. Filling density: when filling, it still depends on the material of the marked product and the requirements of the marking effect.
Of course, different filling methods will produce different effects, but the most important thing is to understand the materials and properties as well as the performance of the fully automatic pipelined laser marking machine.
Only in this way can you get the desired processing results during the tagging process.
When the filling density is high, the marking effect is round and full, but the processing speed is slower and inefficient.
Under the condition that other parameters remain unchanged, it is necessary to change the filling density and find a balance between efficiency and effect.
2.Material type: some materials are not suitable for filling.
Focus, filling, power, frequency and speed should be adjusted according to your influence on the material, and the power of the laser marking machine on the automatic assembly line should not be too high and the service life will be shortened.
If there is a problem with the filling, it may be due to the following reasons:
1. There is a problem with the drawing file itself.
You can check in the CDR software to see if the connection is disconnected or if the drawing is not closed.
Unable to fill in.
2. There is a problem with the filling setting of the laser marking machine software itself. The filling density is too high, so it looks as if there is no filling. When filling, it still depends on the material and mark of the marked product.
Effect requirements, of course, different filling methods will produce different effects,but first it is important to understand the material and performance of your product, and the performance of the laser marking machine.
Only in this way can you achieve the desired processing results in the process.
As for which filler to use, it is nothing more than to make the effect close to the ideal value.